For You Spa

Maintenance

The air, bathers and the surrounding environment (trees, insects, etc.) constantly add impurities to the Spa water.
These impurities soil the water and become food for bacteria and algae. This is why it is necessary to remove them by means of a suitable filtering system. The floating particles are eliminated by making the water in the hot tub flow through a filter that can be one of two types, Quartz sand or Synthetic fibers (cartridges). Depending on the quality of the water, on how often the Spa is used and on the quantity of impurities in the water, the filters tend to slowly clog up and become less efficient.

In these conditions there is a progressive reduction of the quality of the filtered water and the Spa water may cloud over. This is a clear sign that the filter must be cleaned or replaced. Sand filters are cleaned by means of a backwash operation that requires specific technical expertise; occasionally (usually every 3-4 years, or when backwashing is required too often) the sand in the filter must be replaced.

Cartridge filters are checked and cleaned depending on how the Spa is used, on the quality of the water and on many other factors. In any case it must be checked at least once a week. It can be cleaned using normal tap water if the filtered impurities are not too deeply embedded, or by using specific products if there are limescale deposits or oily substances. When the filter fabric shows signs of wear or when cleaning the filter does not restore its efficiency, it must be replaced.

Actiwater pH+

PH + adjuster

When the pH value is not within the range described at point 1.3, chemical products designed specifically to correct the pH value of the water can be used. Many factors alter the pH value of the Spa water. The main ones are:

  • The quality of the water used to fi ll the Spa
  • The use of special alkaline or acid additives
  • The particles that get into the Spa during use (suntan lotions, sweat, cream, etc.).

It is thus a good idea to use a pH adjuster, when necessary, to bring the average parameters back between 7.2 - 7.6. The product offered by Jacuzzi® to this aim is ActiWater pH+ & ActiWater pH-.

Actiwater pH-

PH - adjuster

When the pH value is not within the range described at point 1.3, chemical products designed specifically to correct the pH value of the water can be used. Many factors alter the pH value of the Spa water. The main ones are:

  • The quality of the water used to fi ll the Spa;
  • The use of special alkaline or acid additives;
  • The particles that get into the Spa during use (suntan lotions, sweat, cream, etc.).

It is thus a good idea to use a pH adjuster, when necessary, to bring the average parameters back between 7.2 - 7.6. The product offered by Jacuzzi® to this aim is ActiWater pH+ & ActiWater pH-.

Actiwater Kit

Water treatment kit

There are just a few basic rules to keep your SPA in perfect shape. In the first place it is important to remember that, by means of the filtering circuit supplied, surface dirt and deposits captured by the filter can be eliminated quickly and safely. Another typically chemical operation is the treatment of water using products specifically designed to contrast and efficiently prevent the formation of moulds, bacteria and algae. Thanks to this periodical treatment water is maintained chemically perfect and suitable for bathing. The operation consists in 4 distinct phases:

The operation consists in 4 distinct phases:

  • measuring and checking the pH level
  • pH adjustment
  • addition of the disinfecting agent
  • algae treatment

In addition to using the following products, the shell must be periodically cleaned. Actiwater Kit contains the main components for correct water maintenance: Litmus paper, Actiwater pH-, Actiwater O+, Actiwater Clear.

Actiwater Clean

Clean (methacrylate cleaner)

There are just a few basic rules to keep your SPA in perfect shape. In the first place it is important to remember that, by means of the filtering circuit supplied, surface dirt and deposits captured by the filter can be eliminated quickly and safely. Another typically chemical operation is the treatment of water using products specifically designed to contrast and efficiently prevent the formation of moulds, bacteria and algae. Thanks to this periodical treatment water is maintained chemically perfect and suitable for bathing.
Actiwater Clean is a detergent specific for cleaning the deck and shells of spa baths.

Actiwater Clear

Clear (anti-algae product)

Algae are unicellular organisms that can quickly proliferate in water, especially if it is warm. Algae spores usually enter the Spa water through wind, rain, etc. Even human beings can be spore carriers so Spas installed indoors can also be subject to algae problems. It is a good idea to intervene immediately if there is algae in the Spa water because the longer you wait, the more difficult it will be to eliminate. It is advisable to add an anti-algae product in various spots of your Spa water at least one a week to complete the disinfecting action of the oxygen. The product offered by Jacuzzi® for this operation is ActiWater Clear.

 

Actiwater Filter Clean

Filter Clean

The main aim of a filter is to retain the impurities and the organic particles in the water to ensure water hygiene and quality. Thus, it is fundamental to guarantee the perfect efficiency of filtering agents by proper maintenance. Jacuzzi® suggests the ActiWater Filter Clean product that has been specifi cally developed to periodically clean quartz or cartridge fi lters and that has exceptional scale-solvent and degreasing properties; it also has a sanitising action and prevents the formation of bacteria pockets.

Actiwater Nokal

Limescale inhibitor

Limescale is a mineral dissolved in water in the form of a mineral salt called calcium carbonate (CaCO3). The quantity of calcium carbonate determines the hardness of the water. As the water temperature increases, calcium carbonate tends to recompose and deposit on the surface (limescale deposits). To keep limescale to a minimum it is indispensable to use a specific product such as ActiWater NoKal marketed by Jacuzzi®. This is a very strong limescale inhibitor that contributes towards clearing the water eliminating body grease and the metals dissolved in water.

Actiwater Nofoam

Defoaming agent

If a foaming substance is added to the Spa water (essential oils, detergents etc.), or if foam forms on the surface, the water can be treated using a silicone-based product capable of stopping the formation of foam and eliminating the existing foam in the hot tub. For this operation Jacuzzi® suggests ActiWater NoFoam.

Tester Oxigen & PH

Analytical tests

The pH value is the parameter that indicates how acid or basic the water is. To ensure maximum effi ciency of the disinfectant and a good Spa water quality the pH value of the water must be between 7.2 and 7.6. It is a good idea to always check the pH value of the water and adjust it, if necessary, before adding the disinfectant. It must however be checked once a week by using a tester. The product offered by Jacuzzi®, to check the residual quantity of active oxygen (see point 1.2) and the pH value of the Spa water is TESTER OXYGEN and pH. This product checks these values easily and accurately.

Actiwater O+ tablets

Tablets (100 gr) O +

Whatever the filtering technique used, most of the micro organisms do not end up in the filter and the Spa water may not be perfectly hygienic. Therefore, it will always be necessary to use a chemical water disinfecting treatment. 
As well as being sterile, the Spa water must also be sterilising, i.e. it must contain a percentage of disinfectant capable of instantly neutralising possible sources of pollution. Disinfectants normally used to treat water are chlorine, bromine and active oxygen; the ideal solution for family Spas is active oxygen because it offers many advantages. Active Oxygen ensures maximum disinfecting efficiency thanks to its oxidising properties by means of which it quickly cleans and clears water. 
Just 15 minutes are required for the system to be ready to use again. It is efficient even if the pH values are not ideal, it does not smell and is not an irritant because it does not contain chlorine, aldehyde or alcohol and it does not alter the water hardness. Jacuzzi® suggests the use of slow-melting tablets that release a good quantity of free oxygen in the water over a long period of time. The minimum level of free oxygen must be kept between 1,5 and 3 mg/l. The active oxygen product marketed by Jacuzzi® is ActiWater O+.

Well-Being

Beneficial fragrances are diffused in the water and in the air and mingle with the scents of nature and with the atmospheres of your home. Soft fabrics pamper your entire body, before and after a regenerating and energy boosting bath with those you love the most. The Jacuzzi® for You collection is enriched by a new line specific for Spa baths, the greatest and most prestigious expression of technology and design by Jacuzzi.

Ocean

Scented

To enjoy the benefits of aromatherapy, use the scented beads that have been specifically developed to be used with the Blower.

Kivi

Scented

To enjoy the benefits of aromatherapy, use the scented beads that have been specifically developed to be used with the Blower.

Red Apple

Scented

To enjoy the benefits of aromatherapy, use the scented beads that have been specifically developed to be used with the Blower.

Wood Accessories

Wood elements complementing the Jacuzzi spas are true pieces of furniture, characterizing your spa with the taste and exclusiveness of the Jacuzzi® brand. These decorative furnishings are practical, functional and resistant, and can be perfectly coordinated with the design of your spa. They are also aesthetically perfect, thanks to the classical design and the elegant finishing in teak color.

Table

Lenght: 60.0 cm Height: 70.0 cm Width: 60.0 cm

Storage unit with lid

Lenght: 60.0 cm Height: 36.0 cm Width: 60.0 cm

Corner flower plante

Lenght: 58.5 cm Height: 36.0 cm Width: 34.0 cm

Corner platform

Lenght: 58.5 cm Height: 36.0 cm Width: 34.0 cm

Tall bench

Lenght: 118.0 cm Height: 36.0 cm Width: 34.0 cm

Access steps

Lenght: 78.0 cm Height: 56.0 cm Width: 60.0 cm

Low corner step

Lenght: 105.0 cm Height: 20.0 cm Width: 50.0 cm

High/low step L820

Lenght: 82.0 cm Height: 40.0 cm Width: 50.0 cm

High/low step L1070

Lenght: 107.0 cm Height: 40.0 cm Width: 50.0 cm

Rattan Accessories

All Jacuzzi spas are provided with a complete array of optional decorative furnishings of exceptional quality and stylish elegance. Designed and finished with the utmost care, these additions can complement the benefits and the pleasure of hydromassage, extending the satisfaction even beyond the aquatic interior to include an exterior of aesthetic distinction.

Corner platform

Lenght: 105.0 cm Height: 22.5 cm Width: 50.0 cm

Platform 82 x 50

Lenght: 82.0 cm Height: 22.5 cm Width: 50.0 cm

Platform 122 x 50

Lenght: 122.0 cm Height: 22.5 cm Width: 50.0 cm

Step

Lenght: 107.0 cm Height: 42.5 cm Width: 50.0 cm

Corner Step

Lenght: 105.0 cm Height: 42.5 cm Width: 50.0 cm

Sofa DX

Sofa SX